How to Press DTF Transfers
Step 1
Preheat the Press:
Set your heat press to the recommended temperature, typically around 135-160°C (275-325°F), adjusting based on the garment’s thickness and material.
Step 2
Prepare the Garment:
Place the garment on the heat press and pre-press for 3-5 seconds to eliminate moisture and wrinkles.
Step 3
Position the Transfer:
Place the DTF transfer film onto the garment with the printed side facing down. Cover it with a Teflon sheet or parchment paper to protect it during pressing.
Step 4
Press the Transfer:
Close the heat press and apply firm pressure for 10-15 seconds. Adjust the time and pressure based on the garment material and thickness.
Step 5
Peel the Film:
Open the press and carefully peel the film immediately (hot peel). If the garment’s thickness makes immediate peeling difficult, allow it to cool slightly before peeling. Always peel from a corner using a rolling motion.
Step 6
Post-Press or Second Press (Optional):
For extra durability, cover the design with a Teflon sheet and press again for 5-10 seconds. This helps to ensure the transfer is fully adhered and enhances durability.